The model has been designed for super-easy gluing/assembly. Every piece slots into eachother for quick alignment. Pre-sliced, ready to go.
Baton requires a dowel rod for extra stability; details below.
Intended for FDM printing.
Recommended Filament: PETG, ASA, PLA+, ABS
Do not print in PLA unless it will always stay in a climate-controlled area
Baton Information
The file is sliced into 11 pieces. They are sliced to have flat surfaces and separated by color. Creating easier sanding and painting. Most pieces do not require support material; three pieces just need ~4g total.
Separate by object in slicer
Size: 30.00 x 1.70 x 1.70 in (46.41 x 5.46 x 112.78cm)
Filament: ~200g in original size
Infill: Recommended 8-14% infill with 3 wall thickness.
Dowel rod
3/8th in, 29in long
(0.953cm ⌀, 73.66 long)
I added a tolerance for the dowel rod. If your dowel rod is too lose i reccomend adding pieces of tape to thicken it. (I do this for a lot of my props)
There are STL and 3MF file options in the download. I recommend using the 3MF files if your slicers allow it.
Separate by object in slicer
